If is on when not in use, SET-
or
RES+ could get pressed and go into
cruise when not desired. Keep
off when cruise is not being used.
1. Press to turn the cruise
system on.
2. Get to the speed desired.
3. Press and release SET- . The
desired set speed briefly
appears in the instrument
cluster
WARNING: NEVER spray water on a hot heat exchanger. The resulting steam
could
cause personal injury.
CAUTION: The heat exchanger fins are necessary for good heat transfer.
Do not brush
the fins. This may cause damage to the fins, reducing heat transfer.
NOTE: Remove bugs, leaves, dirt and other de