Buick Regal Owners & Service Manuals

Buick Regal: Interior Lighting

Instrument Panel Illumination Control

The brightness of the instrument

The brightness of the instrument cluster display, infotainment display and controls, steering wheel controls, and all other illuminated controls, as well as feature status indicators can be adjusted.

The knob for this feature is on the instrument panel beside the steering column.

Press to extend the knob, then turn it clockwise or counterclockwise to brighten or dim the lights.

Dome Lamps

The dome lamp controls are in the

The dome lamp controls are in the overhead console.

To operate, press the following buttons: dome lamps when a door is open. OFF : Press to turn off the dome lamps when a door is open.

An indicator light on the button will turn on when the dome lamp override is activated. Press OFF again to deactivate this feature OFF again to deactivate this feature and the indicator light will turn off.

The dome lamps will come on when doors are opened.

lamps on manually. ON/OFF : Press to turn the dome lamps on manually.

Reading Lamps

Front Reading Lamps

There are front reading lamps on the overhead console.

Press the lamp lenses to turn the

Press the lamp lenses to turn the front reading lamps on or off.

Rear Reading Lamps

The rear reading lamps are in the headliner either over the rear seats or over the rear doors.

Press the lamp lenses to turn the

Press the lamp lenses to turn the rear reading lamps on or off.

    READ NEXT:

     Lighting Features

    Entry Lighting Some exterior lamps and most of the interior lamps turn on briefly at night or in areas with limited lighting when the Remote Keyless Entry (RKE) transmitter button is pressed. After

     Climate Controls

     Climate Control Systems

    SEE MORE:

     Suspension Position Sensor Calibration

    Calibration Criteria NOTE: Remove any excess weight and do not sit in the vehicle during the headlamp leveling sensor learn procedure. Any additional weight will cause the calibration of the front and rear suspension position sensors to be inaccurate and affect the operation of the headlamp leveling

     DTC C0475

    Diagnostic Instructions Perform the Diagnostic System Check prior to using this diagnostic procedure:Diagnostic System Check - Vehicle Review the description of Strategy Based Diagnosis:Strategy Based Diagnosis An overview of each diagnostic category can be found here:Diagnostic Procedure

    © 2019-2025 Copyright www.buregal6.com