The vehicle may be equipped with a fuel saving Stop/Start system to shut off the engine and help conserve fuel.
When the brakes are applied and the vehicle is at a complete stop, the engine may turn off. When the brake pedal is released or the accelerator pedal is pushed, the engine will restart.
Remote Keyless Entry (RKE) System
With Remote Start and Power
Liftgate Shown
The Remote Keyless Entry (RKE) transmitter may work up to 60 m (197 ft) away from the vehicle.
: Press to unlock the driver door
and the fuel door. Press again within
five seconds to unlock all doors and
the liftgate. The RKE transmitter can
be programmed to unlock all doors
on the first button press.
: Press to lock all doors, the
fuel
door, and the liftgate.
: Press and release one time to
initiate the vehicle locator. The
exterior lamps flash and the horn
chirps three times.
Press and hold for at least
three seconds to sound the panic
alarm. The horn sounds and the
turn signals flash for about
30 seconds or until
is pressed
again or the vehicle is started.
: If equipped, press and release
and then immediately press and
hold
for at least four seconds to
start the engine from outside the
vehicle using the RKE transmitter.
: If equipped, press twice to
open the liftgate.
Remote Vehicle Start
If equipped, the engine can be started from outside of the vehicle.
Starting the Vehicle
1. Press and release on the
RKE transmitter.
2. Immediately press and hold
for at least four seconds or until
the turn signal lamps flash.
Start the vehicle normally after entering.
When the vehicle starts, the parking lamps will turn on.
Remote start can be extended.
Canceling a Remote Start
To cancel a remote start, do one of the following: