Buick Regal: Tire Pressure Monitor Systems
READ NEXT:
MODEL COVERAGE
Model Coverage
Regal 2011-19
Verano 2012-17
DESCRIPTION & OPERATION
NOTE: The TPMS sensor Relearn procedure must be performed after every
tire
rotation, BCM replacement, or sen
NOTE: The TPMS sensor Relearn procedure must be performed after every
tire
rotation, BCM replacement, or sensor replacement.
When the tire pressure monitor system detects a significant loss, or gain
CAUTION: The tire should be dismounted from the wheel using the tire
changer
manufacturer's instructions. Use the following information to avoid
damage during the dismounting/mounting procedures.
NOT
SEE MORE:
Removal Procedure
1. Active Safety Control Module@Left Side - Remove.
2.
Remove the electronic suspension control module (2) by releasing the tab as
indicated on the
electronic suspension control module bracket (1).
3.
Electrical Connector(1)@Electronic Suspension Control Module(2) - Disconnect
REAR SUSPENSION DESCRIPTION AND OPERATION
The rear suspension system on this vehicle is of the independent link type.
Rear suspension adjustment is achieved
through adjustable toe links and lower control arms. The rear coil springs are
retained between the body and the
lower control arm. Rubber in