Buick Regal 2018-2026 Service Manual / Brakes / Antilock Brake System
Buick Regal: Antilock Brake System
- Specifications, Schematic Wiring Diagrams
- Diagnostic Information and Procedures
- Repair Instructions
- Description and Operation
READ NEXT:
Specifications, Schematic Wiring Diagrams
SPECIFICATIONS
FASTENER SPECIFICATIONS
Reusable Threaded Fastener Tightening Specifications
NOTE:
All fasteners listed in this table can be reused after removal.
SCHEMATIC WIRING DIAGRAMS
ANTILOCK BR
DTC B2745
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
SEE MORE:
Front Brake Pipe Replacement - Right Side
Removal Procedure
WARNING: Brake Fluid Irritant Warning
CAUTION: Brake Fluid Effects on Paint and Electrical Components Caution
1. Place the ignition switch in the OFF position.
2. Without draining the coolant and without disconnecting the hoses, position
aside the radiator surge
tank.
3.
Right
Engine Block Assemble
1.
Install the piston oil nozzle assemblies (2), if equipped.
CAUTION: Refer to Fastener Caution.
2. Install the piston oil nozzle bolts (1) and tighten to 10 N.m (89 lb in).
3.
Lubricate the crankshaft position sensor O-ring with engine oil. Refer to
Adhesives, Fluids, Lubricants, and
Sealers.
© 2019-2026 Copyright www.buregal6.com
