Buick Regal 2018-2025 Service Manual / General Information / Dangers, Warnings, and Cautions
Buick Regal: Dangers, Warnings, and Cautions
- Definition of Danger, Warning, Caution, and Note
- ABS Component Handling Warning
- Fuel and Evaporative Emission Pipe Warning
- SIR Deployed Inflator Modules Are Hot Warning
- Work Stall Test Warning
- Component Fastener Tightening Caution
- Heated Oxygen and Oxygen Sensor Caution
- Steering Gear Preload Adjustment Caution
READ NEXT:
Definition of Danger, Warning, Caution, and Note
The diagnosis and repair procedures in a GM Service Manual contain both
general and specific Dangers,
Warnings, Cautions, Notes or Importants. GM is dedicated to the presentation of
service informat
ABS Component Handling Warning
WARNING: Certain components in the Antilock Brake System (ABS) are not
intended
to be serviced individually. Attempting to remove or disconnect certain
system components may result in personal injury
Fuel and Evaporative Emission Pipe Warning
WARNING: In order to reduce the risk of fire and personal injury
observe the
following items:
Replace all nylon fuel pipes that are nicked, scratched or damaged
during installation, do not attempt
SEE MORE:
Cylinder Head Disassemble
Special Tools
EN-43963 Valve Spring Compressor (off car)
EN-46116 Valve Stem Seal Remover/Installer
EN-50717 Valve Spring Compressor
For equivalent regional tools, refer to Special Tools.
1.
Remove the intake camshaft position sensor (2) and bolt (1).
2.
Remove the exhaust camshaft position
Description and Operation
General
The differential carrier assembly is located in the rear subframe and the
drive shafts extend from it to each respective
rear wheel. The final drive gear consists of a hypoid gear and a differential.
The assembly is bolted to the subframe
with 4 bolts.
The splines-equipped pinion shaft fo
© 2019-2025 Copyright www.buregal6.com
