Buick Regal 2018-2025 Service Manual / Brakes / Disc Brakes
Buick Regal: Disc Brakes
Specifications
FASTENER SPECIFICATIONS
Single Use Non-Threaded Fasteners/Components
NOTE: All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal.
.png)
.png)
DISC BRAKE COMPONENT SPECIFICATIONS
.png)
.png)
.png)
ADHESIVES, FLUIDS, LUBRICANTS, AND SEALERS
The part codes (e.g. SC18) can be found in the electronic parts catalog (EPC) through the search function.
.png)
READ NEXT:
Brake Rotor Thickness Measurement
Special Tools
CH-230 - A Disc Gauge
Equivalent regional tools: Special Tools
WARNING: Refer to Brake Dust Warning.
1. If the inboard friction surface of the brake rotor is not accessible,
reposition
Brake Rotor Assembled Lateral Runout Measurement
Special Tools
GE-571-B Hub and Wheel Runout Gauge
For equivalent regional tools, refer to Special Tools.
WARNING: Refer to Brake Dust Warning.
NOTE:
Brake rotor assembled lateral runout (LRO) exceed
SEE MORE:
Engine Oil and Oil Filter Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Place a drain pan under the vehicle.
3.
Oil Pan Drain Plug (1) - Remove.
4. Oil Pan Drain Plug Seal (2) - Remove and DISCARD.
5. Drain the engine oil into a suitable container.
6.
Remove and DISCARD the oil filter. (1)
7. Ensure that the
Aluminum Wheel Porosity Repair
1. Remove The Tire And Wheel.
2. Inflate The Tire To The Pressure Stated On The Tire Placard.
3. Submerge The Tire/Wheel Into A Water Bath In Order To Locate The Leak.
4. Using A Grease Pencil, Mark The Wheel To Indicate The Leak Areas.
5. Using A Grease Pencil, Mark The Tire At The Valve Stem
© 2019-2025 Copyright www.buregal6.com
