Buick Regal Owners & Service Manuals

Buick Regal: Collision/Detection Systems

Touch and the following may display:

  • Forward Collision System
  • Front Pedestrian Detection
  • Rear Cross Traffic Alert
  • Adaptive Cruise Go Notifier
  • Lane Change Alert

Forward Collision System

This feature will turn on or off Forward Collision Alert (FCA) and Forward Automatic Braking (FAB).

The Off setting disables all FCA and FAB functions. With the Alert and Brake setting, both FCA and FAB are available. The Alert setting disables FAB.

Touch Off, Alert, or Alert and Brake.

Front Pedestrian Detection

This feature may help avoid or reduce the harm caused by front-end crashes with nearby pedestrians.

Touch Off, Alert, or Alert and Brake.

Rear Cross Traffic Alert

This allows the Rear Cross Traffic Alert feature to be turned on or off.

Touch Off or On.

Adaptive Cruise Go Notifier

This feature will give a reminder that Adaptive Cruise Control provides when it has brought the vehicle to a complete stop behind another stopping vehicle, and then that vehicle drives on.

Touch Off or On.

Lane Change Alert

The LCA system is a lane-changing aid that assists drivers with avoiding lane change crashes.

Touch Off or On.

    READ NEXT:

     Comfort and Convenience

    Touch and the following may display: Auto Memory Recall Easy Exit Driver Seat Chime Volume Hands Free Liftgate Control Reverse Tilt Mirror Extended Hill Start Assist Auto Wipe in Reverse Gear

     Lighting

    Touch and the following may display: Vehicle Locator Lights Exit Lighting Left or Right Hand Traffic Adaptive Forward Lighting Vehicle Locator Lights This feature will flash the exterior lamps a

     Power Door Locks

    Touch and the following may display: Open Door Anti Lockout Auto Door Unlock Delayed Door Lock Open Door Anti Lock Out When on, this feature will keep the driver door from locking when the door i

    SEE MORE:

     Stabilizer Shaft Replacement (FWD)

    Removal Procedure 1. Raise and support the vehicle. 2. Rear Stabilizer Shaft Link Nut(1)@Right Side - Remove. 3. Rear Stabilizer Shaft Link Bolt(2)@Right Side - Remove and DISCARD. 4. Rear Stabilizer Shaft Link Nut(1)@Left Side - Remove. 5. Rear Stabilizer Shaft Link Bolt(2)@Left Side - Remove

     DTC P0748, P0962, or P0963

    Diagnostic Instructions Perform the Diagnostic System Check prior to using this diagnostic procedure: Refer to Diagnostic System Check - Vehicle Review the description of Strategy Based Diagnosis: Refer to Strategy Based Diagnosis An overview of each diagnostic category can be found here: R

    © 2019-2025 Copyright www.buregal6.com