Buick Regal Owners & Service Manuals

Buick Regal: Conversions and Add-Ons

Add-On Electrical Equipment

Warning: The Data Link Connector (DLC) is used for vehicle service and Emission Inspection/Maintenance testing. See Malfunction Indicator Lamp (Check Engine Light). A device connected to the DLC - such as an aftermarket fleet or driver-behavior tracking device - may interfere with vehicle systems. This could affect vehicle operation and cause a crash.

Such devices may also access information stored in the vehicle's systems.

Caution: Some electrical equipment can damage the vehicle or cause components to not work and would not be covered by the vehicle warranty. Always check with your dealer before adding electrical equipment.

Add-on equipment can drain the vehicle's 12-volt battery, even if the vehicle is not operating.

The vehicle has an airbag system.

Before attempting to add anything electrical to the vehicle.

    READ NEXT:

     Vehicle Care

     General Information

    For service and parts needs, visit your dealer. You will receive genuine GM parts and GM-trained and supported service people. Genuine GM parts have one of these marks: California Proposition 65 War

     Vehicle Checks

    SEE MORE:

     Theft Deterrent Module Replacement

    Preliminary Procedure Front Floor Console Replacement. Theft Deterrent Module Procedure Disconnect the electrical connector. Control Module References for programming and setup information, if required. IMMOBILIZER SYSTEM COMPONENT PROGRAMMING (WITHOUT BTM) This procedure will learn t

     Engine Coolant Fan Wiring Harness Replacement (2.0L LTG)

    Removal Procedure 1. Front Bumper Fascia Center Support - Remove. 2. Clip (2) - Remove. 3. Disconnect the electrical connector. (1). 4. Clip (1) - Remove [2x]. 5. Clip (1) - Remove. 6. Engine Coolant Fan Electrical Connector (2) - Disconnect [2x]. 7. Clip (1) - Remove [2x]. 8. Ground Cabl

    © 2019-2025 Copyright www.buregal6.com