Buick Regal: Mirrors
SPECIFICATIONS
FASTENER SPECIFICATIONS
Reusable Threaded Fastener Tightening Specifications
NOTE: All fasteners listed in this table can be reused after removal.
.png)
SCHEMATIC WIRING DIAGRAMS
INSIDE REARVIEW MIRROR WIRING SCHEMATICS
Auto-Dimming Mirror (DD8)
.png)
OUTSIDE REARVIEW MIRROR WIRING SCHEMATICS
Driver Position and Folding (A45/A44)
.png)
Passenger Position and Folding (A45/A44)
.png)
Driver and Passenger Position (-A45/A44)
.png)
Dimming and Heating
.png)
READ NEXT:
DTC B154A or B154B
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
Symptoms - Mirrors
NOTE: The following steps must be completed before using the symptom
tables.
1. Perform the Diagnostic System Check - Vehicle before using the Symptom
Tables in order to
verify that all of the follo
SEE MORE:
Metric Wheel Nuts and Bolts Description
Metric Wheel Nuts And Bolts Are Identified In The Following Way:
The Wheel Nut Has The Word Metric Stamped On The Face.
The Letter M Is Stamped On The End Of The Wheel Bolt.
The Thread Sizes Of Metric Wheel Nuts And The Bolts Are Indicated By The
Following Example: M12 X
1.5
M = Metric
12 =
Electronic Suspension Control
SPECIFICATIONS
FASTENER SPECIFICATIONS
Reusable Threaded Fastener Tightening Specifications
NOTE:
All fasteners listed in this table can be reused after removal.
SCHEMATIC AND WIRING DIAGRAMS
ELECTRONIC SUSPENSION CONTROL WIRING SCHEMATICS
Module Power, Ground, and Serial Data (F45)
Sensors and Ac
© 2019-2025 Copyright www.buregal6.com
