Buick Regal Owners & Service Manuals

Buick Regal: Rear Seats

Rear Seat Reminder

If equipped, the message REAR SEAT REMINDER LOOK IN REAR SEAT displays under certain conditions indicating there may be an item or passenger in the rear seat. Check before exiting the vehicle.

This feature will activate when a second row door is opened while the vehicle is on or up to 10 minutes before the vehicle is turned on.

There will be an alert when the vehicle is turned off. The alert does not directly detect objects in the rear seat; instead, under certain conditions, it detects when a rear door is opened and closed, indicating that there may be something in the rear seat.

The feature is active only once each time the vehicle is turned on and off, and will require reactivation by opening and closing the second row doors. There may be an alert even when there is nothing in the rear seat; for example, if a child entered the vehicle through the rear door and left the vehicle without the vehicle being shut off.

Manually Folding the Seatbacks

Caution: Folding a rear seat with the seat belts still fastened may cause damage to the seat or the seat belts. Always unbuckle the seat belts and return them to their normal stowed position before folding a rear seat.

1. Place the front seatbacks in the upright position.

2. Lower the rear head restraint.

3. Pull on the lever on the top of

3. Pull on the lever on the top of the seatback to unlock it and fold the seatback forward.

For outboard seatbacks, a tab near the seatback lever moves forward when the seatback is unlocked.

4. If equipped with a 40/20/40

4. If equipped with a 40/20/40 bench seat, pull the strap on the top of the center seatback to fold the center seatback.

5. Verify the seat is locked in the folded position by pushing down on the seatback.

6. Repeat the steps for the other seatback, if desired.

Automatically Folding the Outboard Seatbacks

Wagon Model Shown, Hatchback Wagon Model Shown, Hatchback Model Similar

The rear seatbacks can also be folded forward by pulling the levers on either side of the rear cargo area.

Raising the Seatbacks

Warning: If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there.

Always push and pull on the seatbacks to be sure they are locked.

Warning: A seat belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After raising the rear seatback, always check to be sure that the seat belts are properly routed and attached, and are not twisted.

To raise the seatback:

1. Push the seatback rearward until it locks in the upright position.

For outboard seats, a tab near the seatback lever retracts when the seatback is locked in place.

2. Make sure the rear seat belts are in the belt guide and are not twisted or caught between the seat cushion and the seatback.

    READ NEXT:

     Seat Belts

    This section describes how to use seat belts properly, and some things not to do. Warning: Do not let anyone ride where a seat belt cannot be worn properly. In a crash, if you or your passenger(s) ar

     How to Wear Seat Belts Properly

    This section is only for people of adult size. There are special things to know about seat belts and children, and there are different rules for smaller children and infants. If a child will be ridin

     Lap-Shoulder Belt

    All seating positions in the vehicle have a lap-shoulder belt. The following instructions explain how to wear a lap-shoulder belt properly. 1. Adjust the seat, if the seat is adjustable, so you can

    SEE MORE:

     Power Transfer Unit Case Assemble

    Power Transfer Unit Idler Gear Shaft Tube and O-ring, Input Shaft Bearing Race and Shim, and Idler Gear Shaft Bearing Race and Shim Installation Power Transfer Unit Idler Gear Shaft Access Tube O-ring- Rear Power Transfer Unit Idler Shaft Tube Procedure The tube orientation for assembly. In

     DTC B2590 or B2595

    Diagnostic Instructions Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Review Strategy Based Diagnosis for an overview of the diagnostic approach. Diagnostic Procedure Instructions provides an overview of each diagnostic category. DTC Descriptors D

    © 2019-2024 Copyright www.buregal6.com