Buick Regal 2018-2026 Service Manual / Suspension
Buick Regal: Suspension
Buick Wheel Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS
REGAL GNC 225/55 R17
.png)
REGAL GNC 245/40 R19
.png)
.png)
REGAL GNC 245/45 R18
.png)
REGAL GNQ 225/55 R17
.png)
REGAL GNQ 245/40 R19
.png)
REGAL GNQ 245/45 R18
.png)
- Electronic Suspension Control
- Front Suspension
- Rear Suspension
- Suspension General Diagnosis
- Tire Pressure Monitoring System
- Tires and Wheels
- Wheel Alignment
READ NEXT:
Electronic Suspension Control
SPECIFICATIONS
FASTENER SPECIFICATIONS
Reusable Threaded Fastener Tightening Specifications
NOTE:
All fasteners listed in this table can be reused after removal.
SCHEMATIC AND WIRING DIAGRAMS
ELECTRO
DTC C0000
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
SEE MORE:
Electronic Suspension Control Module Replacement
Removal Procedure
1. Active Safety Control Module@Left Side - Remove.
2.
Remove the electronic suspension control module (2) by releasing the tab as
indicated on the
electronic suspension control module bracket (1).
3.
Electrical Connector(1)@Electronic Suspension Control Module(2) - Disconnect
New Vehicle Break-In
Caution:
The vehicle does not need an
elaborate break-in. But it will
perform better in the long run if
you follow these guidelines:
Do not drive at any one
constant speed, fast or slow,
for the first 805 km (500 mi).
Do not make full-throttle
starts. Avoid downshifting to
brake or slow the
© 2019-2026 Copyright www.buregal6.com
