Buick Regal 2018-2026 Service Manual / Suspension / Tires and Wheels
Buick Regal: Tires and Wheels
READ NEXT:
Specifications, Diagnostic Information and Procedures
SPECIFICATIONS
FASTENER SPECIFICATIONS
Reusable Threaded Fastener Tightening Specifications
NOTE:
All Fasteners Listed In This Table Can Be Reused After Removal.
ADHESIVES, FLUIDS, LUBRICANTS, AND SE
Aluminum Wheel Porosity Repair
1. Remove The Tire And Wheel.
2. Inflate The Tire To The Pressure Stated On The Tire Placard.
3. Submerge The Tire/Wheel Into A Water Bath In Order To Locate The Leak.
4. Using A Grease Pencil, Ma
SEE MORE:
Radiator Replacement (3.6L LGX)
Removal Procedure
1. Drain the cooling system.
2. Front Bumper Fascia - Remove.
3.
Hood Primary Latch Mount Panel Bracket (3) - Remove.
4. Recover the refrigerant.
5.
Air Conditioning Condenser Bracket (1) - Remove.
6. Transmission Fluid Cooler Inlet and Outlet Pipe Retainer @ Engine Cooler
DTC B3950 or B3951
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provides an overview of each
diagnostic category.
DTC Descriptors
D
© 2019-2026 Copyright www.buregal6.com
