1. Remove The Tire And Wheel.
2. Inflate The Tire To The Pressure Stated On The Tire Placard.
3. Submerge The Tire/Wheel Into A Water Bath In Order To Locate The Leak.
4. Using A Grease Pencil, Ma
WARNING:
Tire Changing Can Be Dangerous And Should Be Done By Trained
Professionals Using Proper Tools And Procedures. Always Read And
Understand Any Manufacturer's Warnings Contained In Their
Cu
Removal
WARNING: Approved Safety Glasses And Gloves Should Be Worn When
Performing
This Procedure To Reduce The Chance Of Personal Injury.
CAUTION: Use A Tire Changing Machine In Order To Dismount Ti
The vehicle must be on a level
surface when checking the coolant
level.
Check to see if coolant is visible in
the coolant surge tank. If the coolant
inside the coolant surge tank is
boiling, do not do anything else until
it cools down.
If coolant is visible but the coolant
level is not at or above
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Refer to Diagnostic Procedure Instructions for an overview of each
diagnostic category.
Circuit/Syste