Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
Removal Procedure
1.
Place a drain pan under the vehicle.
2. Transmission Fluid Cooler Pipe Connector Cap(1)@Radiator - Unclip.
3. Transmission Fluid Cooler Outlet Pipe(2)@Quick Connect Fitting - Disconnect.
4. Raise and support the vehicle.
5. Charge Air Cooler Inlet Air Tube - Remove.
6.
T
NOTE: The following steps must be completed before using the symptom
tables.
1. Before using the symptom diagnostic table, perform the Diagnostic System
Check - Vehicle in
order to verify the following conditions:
There are no DTCs set.
The module can communicate via the serial data.
2. Review