SPECIFICATIONS
FASTENER SPECIFICATIONS
Single Use Non-Threaded Fasteners/Components
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced
with
NEW after removal.
Applicat
WARNING: One or more of the following guidelines may apply when
performing
specific required tests in the work stall:
When a test requires spinning the drive wheels with the vehicle
jacked up, adhere to the following precautions:
Do not exceed 56 km/h (35 mph) when spinning one drive
wheel w
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provides an overview of each
diagnostic category.
DTC Descriptor
DT