Buick Regal: Special Tools and Equipment
SPECIAL TOOLS
BO-38185
J-38185
Hose Clamp Pliers
.png)
GE-8800
J-43600
ACR 2000 Air Conditioning Service Center
.png)
GE-39400-A
J-39400-A
Halogen Leak Detector
.png)
GE-41447
J-41447
R-134a/R123yf
A/C Tracer Dye - Box of 24
.png)
GE-42220
J-42220
Universal 12V Leak Detection Lamp
.png)
GE-43872
J-43872
Fluorescent Dye Cleaner
.png)
GE-45037
J-45037
A/C Oil Injector
.png)
GE-45268
J-45268
A/C Flushing Adapter Kit
.png)
GE-46246
J-46246
Valve Core Tool
.png)
GE-46297
J-46297
A/C Dye Injector Kit
.png)
GE-46297-12
J-46297-12
Replacement Dye Cartridges
.png)
GE-48800
CoolTech A/C Recharge Machine
.png)
GE-48965
CH-50198
Clutch Plate Holder
.png)
GE-50078
Electronic Leak Detector
.png)
GE-50300
R-1234yf A/C Refrigerant Recovery/Recharge Cart
.png)
GE-50597
Machine R-1234yf Contaminated Refrigerant
.png)
GE-50744
R-1234yf PAG Oil Injector Hose
.png)
GE-50745
R-1234yf POE Oil Injector Hose
.png)
EL-47955
J-2534
Multi Diagnostic Interface MDI
.png)
READ NEXT:
HVAC - Automatic
SPECIFICATIONS
FASTENER TIGHTENING TORQUE SPECIFICATIONS
Reusable Threaded Fastener Tightening Specifications
NOTE:
All fasteners listed in this table can be reused after removal.
SCHEMATIC WIRING DI
Diagnostic Information and Procedures
HVAC COMPONENT REPLACEMENT REFERENCE
DTC B0163
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
SEE MORE:
Draining Fluids and Oil Filter Removal
1.
Remove the oil filter (1). Remove the oil pan drain plug and allow the oil to
drain out.
2. Clean the oil filter housing in the engine block.
CAUTION: Refer to Fastener Caution.
3. Install the oil pan drain plug and tighten to 25 N.m (18 lb ft).
4. If cleaning or repairing the engine block, i
Adjust Link Replacement (FWD)
Removal Procedure
1. Remove the tire and wheel assembly.
2. Rear Wheel Speed Sensor Replacement (Front Wheel Drive) Rear Wheel Speed
Sensor Replacement
(All Wheel Drive) - Remove.
3.
Rear Suspension Adjust Link Nut(1) - Remove.
4. Rear Suspension Adjust Link Cam(2) - Remove.
5.
Rear Suspension
