Buick Regal: Steering Wheel and Column
SPECIFICATIONS
FASTENER SPECIFICATIONS
Single Use Threaded Fastener/Component Tightening Specifications
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced
with NEW after removal.
.png)
Reusable Threaded Fastener Tightening Specifications
NOTE:
All fasteners listed in this table can be reused after removal.
.png)
ADHESIVES, FLUIDS, LUBRICANTS, AND SEALERS
.png)
SCHEMATIC AND WIRING DIAGRAMS
STEERING WHEEL WIRING SCHEMATICS
Heated Steering Wheel (UVD)
.png)
READ NEXT:
NOTE: Review the system operation in order to familiarize yourself with
the system
functions.
Refer to Steering Wheel and Column Description and Operation.
Symptoms List
Refer to a symptom diagnostic
Diagnostic Instructions
Perform the Diagnostic System Check prior to using this diagnostic
procedure:Diagnostic System
Check - Vehicle
Review the description of Strategy Based Diagnosis:Strategy
SEE MORE:
Special Tools
EN-46745 Piston Pin Clip Remover/Installer
EN-46745-4 Piston Pin Clip Remover/Installer Adapter
For equivalent regional tools, refer to Special Tools.
1.
NOTE: Install the piston onto the connecting rod with the arrow on top
of the piston
oriented to the same side as the cast fea
CRUISE CONTROL SWITCH REPLACEMENT
Removal Procedure
1. Steering Wheel Airbag - Remove.
2.
Cruise Control Switch Bolt (1) - Remove.
3.
Using a flat bladed plastic trim tool remove the cruise control switch (1).
4. Disconnect the electrical connector.
Installation Procedure
1.
Cruise Control Swi