Buick Regal: Vehicle Information Menu (VEHICLE) Items
Units : Choose between Metric or
US when Units is active. Press .png)
to
confirm the setting. This will change
the displays on the DIC to the type
of measurements you select.
Speed Warning : This display is used to set the vehicle speed at which the speed warning chime sounds and the alert is displayed.
The speed can be set by pressing
while the speed warning display
is showing.
Remaining Oil Life : Displays an estimate of the oil's remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains.
When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display.
The oil should be changed as soon as possible. The Oil Life display must be reset after each oil change. Do not reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system.
Oil Pressure : Oil pressure is displayed in either kilopascal (kPa) or in pounds per square inch (psi).
Battery Voltage : Displays the current battery voltage, if equipped.
Battery voltage changes are normal while driving. If there is a problem with the battery charging system, the DIC will display a message.
ECO Drive Assist Menu (ECO) Items
Fuel Economy : The center displays the approximate
instantaneous fuel economy as a
number and bar graph. Displayed
above the bar graph is a running
average of fuel economy for the
most recently traveled selected
distance. Displayed below the bar
graph is the best average fuel
economy that has been achieved for
the selected distance. The selected
distance is displayed at the top of
the page as "last xxx mi/km." Press
.png)
to select the distance or reset the
best value.
The display provides information on how current driving behavior affects the running average and how well recent driving compares to the best that has been achieved for the selected distance.
Economy Trend : Shows a history of the Average Fuel Economy from the last 50 km (30 mi). Each bar represents about 5 km (3 mi) of driving. During driving the bars will shift to always reflect the most recent distance on the right side.
Press and hold .png)
to clear the graph
or press .png)
to reset through
the menu.
READ NEXT:
Uplevel DIC
DIC Info Page Options
The info pages on the DIC can be
turned on or off through the
Options menu.
1. Press to access the cluster
applications.
2. Press or
to scroll to the
Options application.
3
Head-Up Display (HUD)
Warning:
If the HUD image is too bright or
too high in your field of view, it
may take you more time to see
things you need to see when it is
dark outside. Be sure to keep the
HUD image dim and placed
HUD Views
There are four views in the HUD.
Some vehicle information and
vehicle messages or alerts may be
displayed in any view.
Metric
English
Speed View : This display gives the
speedometer reading (in Eng
SEE MORE:
Schematic Wiring Diagrams
HEADLIGHTS/DAYTIME RUNNING LIGHTS (DRL) WIRING SCHEMATICS
Controls and Indicators
Halogen Lamps and Daytime Running Lamps (T4A)
Left LED Headlamp Power, Ground and Serial Data (T4L)
Left LED Low Beam Lamps, Cornering Lamp and Cooling Fan (T4L)
Left LED High Beam Lamps, and High Beam Spot (T4L)
Rear Suspension Lower Trailing Link Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Remove the rear tire and wheel assembly.
3.
Rear Suspension Trailing Arm Nut(1) - Remove.
4. Rear Suspension Trailing Arm Bolt(2) - Remove and DISCARD.
5.
Rear Suspension Trailing Arm Bolt(1) - Remove and DISCARD.
6.
Rear Suspension Lowe
